Trig – completion and testing

Well, after many hours of careful preparation and meter continuity testing of the two prime D plugs it came to the time to connect up. Realised I had managed to run out of positive bus connections so a brief pause whilst I change the behind the panel bus bar to give me up to 10 locations.

I also changed from the screw type connector block to a crimped ring connector with a handshake fly lead .. This means I can isolate and fully remove any powered item without affecting any others.

First power up and bingo .. All lights up … Default frequencies were changed to add 134.67 the ATIS for Jersey and then 119.45 (Tower) and

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Blog at

Up ↑

%d bloggers like this: